Skip to main content

Managing Dealer Account Access: Trials, Suspension, and Meter Rejection

How to set an entity up as a trial with an expiration date, suspend a customer's access, and stop paying for meters from expired or suspended accounts.

Written by Joshua Kern

These settings control customer access to Print Tracker and what you are billed for. They live under the Dealer section of an entity's settings and apply to dealer entities only.

All three settings require the This entity is a dealer toggle to be enabled on the entity. You cannot configure trial access or suspend a non-dealer entity, so if the options look missing, check that toggle first.

Setting Up a Trial Entity

By default every entity is a fully-fledged account. Configuring one as a trial means access is cut off automatically when the trial period expires, so an evaluation does not quietly become a free account.

  1. Select the entity using the entity selector.

  2. Using the sidebar, click Admin, then Manage entity.

  3. Click the Settings tab.

  4. Expand the Dealer section.

  5. Confirm This entity is a dealer is enabled.

  6. Set Account status to Evaluating.

  7. Under Access expiration, click the calendar icon and choose the date the trial should end.

Set the expiration deliberately. When it passes, the customer loses access without further warning from you.


​

Suspending Account Access

Suspending an account immediately cuts off the customer's access to Print Tracker. Anyone at that entity who is logged in or tries to log in will be locked out. Confirm this is the intended commercial outcome before you save, because the customer will notice straight away.

  1. Select the entity using the entity selector.

  2. Using the sidebar, click Admin, then Manage entity.

  3. Click the Settings tab.

  4. Expand the Dealer section.

  5. Confirm This entity is a dealer is enabled.

  6. Set Account status to Suspended.

Suspension is reversible: set the status back to restore access.


​

Rejecting Meters From Expired or Suspended Accounts

As a dealer you pay for the meters collected from your customers. An account that is expired or suspended may still have agents installed and running, which means you can keep being charged for a customer you are no longer serving.

This setting stops meters from those accounts uploading at all.

Rejected meters are not collected and not stored, so there is no record of that period to recover later. If a suspended customer is reinstated, the gap in their meter history is permanent. Do not enable this on an account you expect to bring back, and be aware it may affect final-invoice reads if a contract is still being settled.

  1. Select the entity using the entity selector.

  2. Using the sidebar, click Admin, then Manage entity.

  3. Click the Settings tab.

  4. Expand the Dealer section.

  5. Enable the Reject meters from inactive accounts toggle.

Consider Uninstalling Instead

Rejecting meters stops the billing but leaves the agent running on the customer's machine, still scanning their network. Where a customer relationship has genuinely ended, uninstalling the agent is the cleaner outcome for both sides. See Installing and Managing Agents.

Deactivating an install is a middle option: it hides the install from your account without uninstalling it from the machine.

Related Articles

  • Settings Inheritance: How Entity and Device Settings Work

  • Installing and Managing Agents

  • Discovering and Managing Devices, for non-managed devices as a cheaper alternative to full monitoring

Did this answer your question?